Concentrated candle dyes for colouring jar candles, pillar candles and wax melts. Choose from 14 colours in 10 g, 30 g or 50 g packs.
Recommended dosage: 0.1–0.3% of the wax weight
That means 1–3 g of dye per 1 kg of wax. Start at 0.1% for a lighter shade and increase gradually for a deeper colour. The result depends on the colour, wax and other ingredients.
Think of it like seasoning a recipe: begin with a small amount, test the result, then adjust. A 10 g pack colours approximately 3.3–10 kg of wax at the recommended dosage.
Quick weighing guide
Wax weight | 0.1% | 0.2% | 0.3% |
100 g | 0.10 g | 0.20 g | 0.30 g |
180 g | 0.18 g | 0.36 g | 0.54 g |
270 g | 0.27 g | 0.54 g | 0.81 g |
360 g | 0.36 g | 0.72 g | 1.08 g |
450 g | 0.45 g | 0.90 g | 1.35 g |
1000 g | 1.00 g | 2.00 g | 3.00 g |
When and how to add the dye
Weigh the wax, then measure the dye with a precision scale. A scale reading to 0.01 g helps with small test batches.
Melt the wax and bring it to the heating temperature recommended on its product page. Add the dye at this stage, before adding fragrance, while the wax is fully melted. For our range this is generally 80–90°C; for Yucca 234, follow its lower 75–80°C heating range.
Stir gently until the dye has fully dissolved and the colour is even. Check the bottom of the pouring jug for any undissolved particles.
Let a small drop set on a white ceramic plate to check the finished shade. Judge the cooled sample rather than the hot wax.
Once the colour is right, let the wax reach its recommended fragrance-addition temperature, add your fragrance and mix as directed on the wax page.
Pour at the temperature recommended for your wax and allow the finished candle to cure.
Practical tips
For a 100 g test batch, use just 0.10–0.30 g of dye. Weigh the amount instead of estimating a spoonful.
Record the wax, colour and dosage so you can repeat the shade. Colours shown online are a guide; your cooled wax is the final check.
Start with a small test batch when combining colours. Increasing the dye dose can affect the finished candle, so burn-test the complete wax, fragrance, dye and wick recipe after curing.

















